Advaco #8040 MVP

Type:

Advaco #8040 MVP is a low exotherm resin for use in hand lay up or spray applications.

Outstanding Advantages:

This product has excellent wetting properties and minimum shrinkage.  It is suggested to be used when a minimum of pattern show through is desired.  Advaco #8040 MVP is used in the manufacture of boats, bathtubs, and industrial fabrications of demanding qualities.  Advaco #8040 MVP has been approved by the FDA.

Viscosity:

Gel Schedule:

Measured @ 72° F
0.5% MEK Peroxide                      27 - 29 minutes
1.0% MEK Peroxide                      15 - 17 minutes
1.5% MEK Peroxide                      12 - 14 minutes
2.0% MEK Peroxide                      8 - 11 minutes

Physicals Clear Casting:

Heat Distortion                                   176 ° F
Flexural Strength                                 14,000 lbs. / Sq. In.
Flexural Modulus                                530,000 lbs. / Sq. In.
Tensile Strength                                  8,500 lbs. / Sq. In.
Water Absorption, 24 Hr. @ 77°F     0.15%
Elongation                                           1.5%
Barcol Hardness

Storage:

It is recommended that Advaco #8040 MVP resin be stored in a cool place.  It is not advisable to store in the direct rays of the sun.  A shelter should be provided.

Controlled Manufacturing:

Advaco #8040 MVP is manufactured under exacting conditions with new modern equipment, offering the user superior physicals and continuing consistency of product from batch to batch.