ADVACO GP200P Low Profile Polyester Laminating Resin

Type:

Based on dicyclopentadiene (DCPD), but blended with a flexible ortho phthalic polyester, this resin features the best of both worlds, excellent low shrinkage formulations without the inherent brittleness associated with straight DCPD's and custom formulated for any fabricating needs promoted or unpromoted, waxed or unwaxed, fast cure, slow cure, low exo, filament winding, RTM and filled formulas available.

Outstanding Advantages:

Ÿ Excellent wet out
Ÿ Ultra low print show through
Ÿ Very economical - saves $$$$$$
Ÿ Superior sag resistance

Viscosity:

Measured on Brookfield LVF @ 72° F
6 RPM                      #2 Spindle                 1600 - 1900 cps
60 RPM                    #3 Spindle                 580 - 640 cps

Gel Schedule:

Measured @ 72° F                Winter                 Summer
1.0% MEK Peroxide      18 - 20 minutes      25 - 28 minutes
1.5% MEK Peroxide      13 - 14 minutes      19 - 20 minutes
2.0% MEK Peroxide        9 - 10 minutes      13 - 14 minutes

Physicals Clear Casting:

Heat Distortion                      180 ° F
Tensile Strength                     8,480 lbs. / Sq. In.
Elongation                             5.0%
Barcol Hardness                    42 - 45

3 Plies, 1½ oz. Mat Laminate:

Tensile Strength                     20,200 lbs. / Sq. In.
Flexual Strength                     38,400 lbs. / Sq. In.
Elongation                              4.0%

Storage:

It is recommended that Advaco GP200P Low Profile Resin be stored in a cool place.  It is not advisable to store in the direct rays of the sun.  A shelter should be provided.

Controlled Manufacturing:

Advaco GP200P Low Profile Resin is manufactured under exacting conditions with new modern equipment, offering the user superior physicals and continuing consistency of product from batch to batch.

Disclaimer:

Important notice to purchaser:  All statements, technical information and recommendations herein are based on tests we believe to be reliable, but the accuracy of completeness thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied, including the implied waranties of merchantability and fitness for purpose.  Manufacturer's only obligation shall be to replace such quantity of the product proved to be defective.  Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.  Manufacturer shall not be liable either in tort or in contract for any loss or damage, direct, incidental, or consequential, arising out of the use of or the inability to use the product.  No statement or recommendation not contained herein shall have any force or effect unless is an agreement signed by officers of seller and manufacturer.